Effects of Ultra-sonification Assisting Polyethylene Glycol Pre-treatment on the Crystallinity and Accessibility of Cellulose Fiber

In order to prepare the advanced cellulosic super-absorbent polymer with high grafting level, we tried the novel ultrasound wave assisting polyethylene glycol (PEG) pre-treatment method to decrease the crystallinity and increase the accessibility of cellulose fiber. The effects of ultrasonification assisting PEG method on the crystallinity and swelling capacity of cellulose fiber were investigated. To optimize the experimental condition, the Taguchi method was employed in the treatment process. The influence factors such as ultrasonic wave power, ultrasonic wave time and PEG molecular weight relative to the crystallinity of cellulose fiber were studied systematically. The degree of crystallinity of cellulose fiber was measured by wide-angle X-ray diffraction (WAXD). The morphology of cellulose fiber was observed by environment scanning electron microscopy (ESEM). The effects of pre-treatment variables on the water absorbency and water retention values of cellulose fiber were also investigated. The research results revealed that, under the optimal experimental condition (ultrasonic powder, 500 W; ultrasonic time, 150 s; PEG molecular weight, 600 g/mol), the crystallinity of cellulose fiber decreased from 72.16 to 42.95%. Accordingly, the absorbency of cellulose fiber increased from 1.436 to 2.063 g/g, and the water retention value increased from 47.21 to 113.4%. However, the morphology of cellulose fiber did not change thoroughly compared with the original cellulose fiber. It can be hypothesized that the original inter- and intra-macromolecular hydrogen bonds in cellulose network were weakened, resulting from the high level dispersion of PEG within cellulose network without breaking the surface morphology of fiber.     

Fluorescence Properties of Europium and Terbium Triundecylenate-Containing Polymers and Solutions

Europium triundecylenate, Eu(UA)₃, and terbium triundecylenate, Tb(UA)₃, were prepared by the method described in our previous paper. Either Eu(UA)₃ or Tb(UA)₃ was dissolved in methacrylic acid (<20%) and copolymerized as a crosslinker with methyl methacrylate (>80) by bulk polymerization in molds made of two glass plates. The fluorescence spectroscopy of these Eu- or Tb-containing polymers under ultraviolet/visible excitation light was investigated. The fluorescence spectroscopy of solutions of Eu(UA)₃ or Tb(UA)₃ in methacrylic acid was measured and compared with that of the solid-state Eu- or Tb-containing polymers. The fluorescence excitation and emission spectra of the solutions and polymers showed the characteristic features of free Eu³⁺ or Tb³⁺. The lifetime fluorescence of the solutions and polymers with Eu³⁺ are also included.     

Controllable Growth of Fullerene Nanostructures

One‐dimensional fullerene nanostructures with well‐defined morphology have been prepared by a controllable method. Fullerene molecules, such as C₆₀ derivatives and endohedral metallofullerenes, are introduced into the pores of anodic aluminum oxide (AAO) templates under a direct current (DC) electric field. Then several nanostructures such as porous‐wall and solid‐wall fullerene nanowires and nanotubes were fabricated in the pores. The morphology of the fullerene nanostructures is well controllable, and the fullerene nanotubes can be further fabricated through filling nickel atoms inside to form fullerene‐metal composite structures. The results provide, in principle, a step toward broader applications of fullerene‐related materials in nanoscience and nanotechnology.     

Synthesis of Low Molecular Distribution Dihydric Polybutadiene in the Presence of Triflic Acid

A method is described for the preparation of functional polybutadiene (PB) with hydroxyl groups along the polymer chain. This material can be used directly or as the starting substrate for further polymerization in both academic and industrial processes. We have developed a convenient method to obtain a polymer with a narrow molecular weight distribution and with a known content of hydroxyl groups along the backbone. By controlling the hydroxylation reaction conditions, the appropriate molar ratios of THF, water and acid with the epoxide are 30, 15 and 1.5, respectively. By minimizing the crosslinking reaction, the desired PB was prepared and subsequently characterized.     

Fast naked-eye detection of amines with viologen derivatives

Three viologen derivatives with the ability to detect amines were synthesised. Upon interacting with amines, a rapid colour change caused by electron transfer and charge transfer between viologen derivatives and amines can be directly observed by naked eyes. With fluorine substituents, the detection sensitivity of these viologen derivatives for amines is remarkably enhanced to reach the level of ppm.     

Synthesis and photovoltaic properties of a star-shaped molecule based on a triphenylamine core and branched terthiophene end groups

A new star-shaped donor-acceptor molecule has been synthesized for application as the donor material in solution-processed bulk-heterojunction organic solar cells (OSCs). The molecule consists of a triphenylamine (TPA) unit as the core and a donor unit with three arms containing benzo[1,2,5]thiadiazole (BT) acceptor units and 5,5’’-dihexyl-2,2′:3′,2″-terthiophene (tTh) end groups. The molecule, denoted S(TPA-BT-tTh), exhibits a broad absorption band in the wavelength range 300-650 nm and high hole mobility of 1.1×10 -4 cm2 V -1 s 1 . An OSC device based on S(TPA-BT-tTh) as donor and [6,6]-phenyl C71 -butyric acid methyl ester (PC 70 BM) as the acceptor (1:3, w/w) exhibited a power conversion efficiency of 2.28% with a short circuit current density of 6.39 mA/cm2 under illumination of AM.1.5, 100 mW/cm2 .     

Selective DNA detection at Zeptomole level based on coulometric measurement of gold nanoparticle-mediated electron transfer across a self-assembled monolayer

A selective DNA sensing with zeptomole detection level is developed based on coulometric measurement of gold nanoparticle (AuNPs)-mediated electron transfer (ET) across a self-assembled monolayer on the gold electrode. After immobilization of a thiolated hairpin-structured DNA probe, an alkanethiol monolayer was self-assembled on the resultant electrode to block [Fe(CN)6 ]-3-/4in a solution from accessing the electrode. In the presence of DNA target, hybridization between the DNA probe and the DNA target breaks the stem duplex of DNA probe. Consequently, stem moiety at the 3′-end of the DNA probes was removed from the electrode surface and made available for hybridization with the reporter DNA-AuNPs conjugates (reporter DNA-AuNPs). The thiolated reporter DNA matches the stem moiety at the 3′-end of the DNA probe. AuNPs were then enlarged by immersing the electrode in a growth solution containing HAuCl 4 and H2O2 after the reporter DNA-AuNPs bound onto the electrode surface. The enlarged AuNPs on the electrode restored the ET between the electrode and the [Fe(CN)6]3 -/4- , as a result, amplified signals were achieved for DNA target detection using the coulometric measurement of Fe(CN)6 3- electro-reduction by prolonging the electrolysis time. The quantities of ET on the DNA sensor increased with the increase in DNA target concentration through a linear range of 3.0 fM to 1.0 pM when electrolysis time was set to 300 s, and the detection limit was 1.0 fM. Correspondingly, thousands of DNA (zeptomole) copies were detected in 10L samples. Furthermore, the DNA sensor showed excellent differentiation ability for single-base mismatch.     

Polymer light-emitting electrochemical cells: Recent developments to stabilize the p-i-n junction and explore novel device applications

Polymer light-emitting electrochemical cells (PLECs) employ a thin layer of a luminescent conjugated polymer admixed with an ionic source and an ionic conductor for the in-situ formation of p-i-n junction and subsequent efficient injections of both electrons and holes.The junction formation enables the use of air-stable conductors as the cathode and a relatively thick emissive polymer layer that is more compatible with low-cost solution-based processes.This paper overviews the operation mechanism of the PLECs,the properties and drawbacks of the devices.The employment of crosslinkable ionic conductors to stabilize the p-i-n junction is reviewed.The resulting static junction electroluminesces light at high brightness,high efficiency,and prolonged lifetime.Silver paste and carbon nanotubes can be used as the cathode,thus,PLECs were fabricated by lamination.Using single wall carbon nanotubes coated elastic substrate as both anode and cathode,the PLECs can be made highly stretchable.     

Comparison on effect of hydrophobicity on the antibacterial and antifungal activities of α-helical antimicrobial peptides

HPRP-A1, a 15-mer α-helical cationic peptide, was derived from N-terminus of ribosomal protein L1 (RpL1) of Helicobacter pylori. In this study, HPRP-A1 was used as a framework to obtain a series of peptide analogs with different hydrophobicity by single amino acid substitutions in the center of nonpolar face of the amphipathic helix in order to systematically study the effect of hydrophobicity on biological activities of -helical antimicrobial peptides. Hydrophobicity and net charge of peptides played key roles in the biological activities of these peptide analogs; HPRP-A1 and peptide analogs with relative higher hydrophobicity exerted broad spectrum antimicrobial activity against Gram-negative bacteria, Gram-positive bacteria and pathogenic fungi, but also showed stronger hemolytic activity; the change of hydrophobicity and net charge of peptides had similar effects with close trend and extent on antibacterial activities and antifungal activities. This indicated that there were certain correlations between the antibacterial mode of action and the antifungal mode of action of these peptides in this study. The peptides exhibited antimicrobial specificity for bacteria and fungi, which provided potentials to develop new antimicrobial drugs for clinical practices.     

Synthesis,Physical Properties,and Anion Recognition of Two Novel Larger Azaacenes: Benzannelated Hexazaheptacene and Benzannelated N,N′‐Dihydrohexazaheptacene

Two novel larger azaacenes with six or ten N atoms in their backbones, benzannelated 9,11,13,22,24,26‐hexazatetrabenzo[a,c,l,n]heptacene ( HATBH , 1 ) and benzannelated 9,26‐dihydro‐9,11,13,22,24,26‐hexaza‐tetrapyrido[3,2‐a: 2′,3′‐c: 3′′,2′′‐l: 2′′′,3′′′‐n]heptacene ( DHATPH, 2 ), have been successfully synthesized in two steps. The theoretical band gaps estimated through DFT calculations for HATBH ( 1 ) and DHATPH ( 2 ) are 1.949 eV and 2.278 eV, which are close to the experimentally obtained optical band gaps (2.14 eV and 2.39 eV). Interestingly, HATBH ( 1 ) can act as efficient anion sensor for F^? and H₂PO₄^?, while DHATPH ( 2 ) selectively responds to F^? among the ten different anions used (F^?, Cl^?, Br^?, I^?, PF₆^?, HSO₄^?, NO₃^?, BF₄^?, AcO^?, and H₂PO₄^?). Our synthetic strategy could offer a promising and easy way to obtain even larger azaacenes.